Digital Calipers arrow Mitutoyo AOS Absolute Digimatic Caliper

AOS Absolute Digimatic Caliper



Part#: Series 500
Supplier: Mitutoyo
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge

The Mitutoyo series 500 Digital Calipers are quality digital precision dimensional gage that can be used for conducting outside, inside, depth and step (distance) measurements. Its new exclusive patented Advanced Onsite Sensor (AOS) offers improved measurement dependability by increasing resistance to harsh workshop conditions. Carbide-tipped jaw models are ideally suited to the measurement of rough-machined workpieces, castings, grindstones, etc.

 

The new Mitutoyo’s electromagnetic inductive sensor fend off the water, dirt and dust that can cause errors during the measurements. The Miutoyo 500 series of calipers feature advanced functions to get the job done easily and precisely.

ABS (absolute) measurement function

enables absolute-mode measurement to be started without any zero-setting after switch-on. The absolute origin position can be set, or reset, with the ORIGIN switch at any time.

INC (incremental) measurement function:

Enables the display value to be set to zero, temporarily, at the current slider position to enable easy incremental-mode measurement

External output function:
The data output function allows integration into statistical process control
and measurement systems. It also permits measurement data to be exported using the optional data cable.

Features

  • Large and clear LCD readout.
  • The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements. This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point).
  • Data Hold Unit (959143) is optional.
  • Carbide-tipped jaw type calipers are also available. With thumb roller. Except 500-500-10, 500-501-10,500-502-10.
  • Supplied in fitted plastic case. Except 1000mm / 40” supplied in wooden case.

Specifications

  • Accuracy: Refer to the list of specifications
  • Resolution: 0.01mm or .0005"/0.01mm
  • Repeatability: 0.01mm / .0005”
  • Display: LCD
  • Power supply: Button-type silver oxide batterySR44 (No. 938882), 1 piece supplied as standard (The standard supplied battery is for the monitor.)
  • Battery life: Approx. 3.5 years under normal use
  • Maximum response speed: Unlimited
  • Length standard: ABSOLUTE electrostatic capacitance type linear encoder
  • Max. response speed: Unlimited Battery: SR44 (1 pc.), 938882
  • Battery life: Approx. 3.5 years under normal use

Dimensions

mitutoyo-series-500-dimensions


Need to have this new Mitutoyo Series 500 AOS Absolute Digimatic Caliper calibrated? While this gauge has passed a quality control check, having a calibration certificate for digital calipers might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old Mitutoyo gauge to be calibrated? We might be able to calibrate Mitutoyo digital calipers (Mitutoyo Series 500 or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescription Range Accuracy Special Data OutputIn Stock
500-159-30AOS Digimatic Caliper 0-6in 0-150mm ±.001in Carbide-tipped jaws for OD measurement No 2
500-160-30AOS Digimatic Caliper 0-6in 0-150mm ±.001in Carbide-tipped jaws for OD and ID measurement No 1
500-163-30AOS Digimatic Caliper 0-8in 0-200mm ±.001in Carbide-tipped jaws for OD measurement No 3
500-164-30AOS Digimatic Caliper 0-8in 0-200mm ±.001in Carbide OD/ID Jaws No 1
500-165Digimatic Caliper 0-12in 0-300mm ±.0015in Carbide-tipped jaws for OD measurement No 1
500-166Digimatic Caliper 0-12in 0-300mm ±.0015in Carbide-tipped jaws for OD and ID measurement No 1
500-167Digimatic Caliper 0-12in 0-300mm ±.0015in Carbide-tipped jaws for OD measurement yes 2
500-168Digimatic Caliper 0-12in 0-300mm ±.0015in Carbide-tipped jaws for OD and ID measurement Yes 1
500-170-30AOS Digimatic Caliper 0-4in 0-100mm ±.001in .075" Round depth bar Yes 1
500-171-30AOS Digimatic Caliper 0-6in 0-150mm ±.001in Yes 2
500-172-30AOS Digimatic Caliper 0-8in 0-200mm ±.001in Yes 1
500-173Digimatic Caliper 0-12in 0-300mm ±.0015in Yes 1
500-174-30AOS Digimatic Caliper 0-6in 0-150mm ±.001in with OD carbide jaw Yes 1
500-175-30AOS Digimatic Caliper 0-6in 0-150mm ±.001in with OD,ID carbide jaw Yes 1
500-176-30AOS Digimatic Caliper 0-8in 0-200mm ±.001in with OD carbide jaw Yes 1
500-177-30AOS Digimatic Caliper 0-8in 0-200mm ±.001in with OD,ID carbide jaw Yes 2
500-178-30AOS Digimatic Caliper 0-6in 0-150mm ±.001in .075 in rod depth bar Yes 1
500-193Digimatic Caliper 0-12in 0-300mm ±.0015in No 1
500-195-30AOS Digimatic Caliper 0-4in 0-100mm ±.001in .075" Round depth bar No 1
500-196-30AOS Digimatic Caliper 0-6in 0-150mm ±.001in No 1
500-197-30AOS Digimatic Caliper 0-8in 0-200mm ±.001in No 2
500-505-10Digimatic Caliper 0-18in 0-450mm ±.002in Without Thumb Roller Yes 2
500-506-10Digimatic Caliper 0-24in 0-600mm ±.002in Without Thumb Roller Yes 2
500-507-10Digimatic Caliper 0-40in 0-1000mm ±.003in Without Thumb Roller Yes 2
To order AOS Absolute Digimatic Caliper or technical assistance please contact us.

More Recommendations for Digital Calipers

Shimana Digi Ricor

Digi Ricor
Part#: DIGIRICOR

Shimana Digi Remor

Digi Remor
Part#: DIGIREMOR