Digital Calipers arrow Shimana Regular Digital Caliper (3 Keys)

Regular Digital Caliper (3 Keys)



Part#: SHAYDC144 Series
Supplier: Shimana
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge
Number pieces in packaging:1

With its resolution of 0.01 mm this digital caliper accords to DIN862 and ISO Standards. Three dimensions are available: 150 mm (6 in), 200 mm (8 in), 300 mm (12 in).

Looking to buy a digital caliper in Toronto, Ontario? We are a canadian metrology vendor with more than 30 years experience, located in Brampton. We can also calibrate digital calipers to ISO 17025.

shimana-electronic-caliper

features

  • Resolution: 0.01mm
  • Ranges and accuracy: 150mm/±0.03mm; 200mm/±0.03mm; 300mm/±0.04mm;
  • Can be used in workshop conditions
  • Units conversion
  • Data output
  • Power ON/OFF
  • Zero set at any position
  • Other graduation films available

Specs 

Measuring Range Order No. Resolution Permissible Error  L  a  b  c  d
0-150mm(0-6") SHAYDC144 0.01mm(.0005") ±0.03mm 236 40 21 16.5 16
0-200mm(0-8") SHAYDC144-08 0.01mm(.0005") ±0.03mm 286 50 24 19.5 16
0-300mm(0-12") SHAYDC144-12 0.01mm(.0005") ±0.04mm 400 60 25 20.5 17

47

Please note that the new part number for the 6 in (150 mm) digital caliper ANRDC06 is SHAYDC144, , for the 8 in (200 mm) digital caliper ANRDC08 is SHAYDC144-08, for the 12 in (300 mm) digital caliper ANRDC12 is SHAYDC144-12.


Need to have this new Shimana SHAYDC144 Series Regular Digital Caliper (3 Keys) calibrated? While this gauge has passed a quality control check, having a calibration certificate for digital calipers might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old Shimana gauge to be calibrated? We might be able to calibrate Shimana digital calipers (Shimana SHAYDC144 Series or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescription Measuring RangeIn Stock
SHAYDC144Digital Caliper 6" 0-150mm (0-6in) 0
SHAYDC144-08Digital Caliper 8" 0-200 mm (0-8 0
SHAYDC144-12Digital Caliper 12" 0-300mm (0-12 5
To order Regular Digital Caliper (3 Keys) or technical assistance please contact us.

More Recommendations for Digital Calipers