Height Gauges arrow Starrett 24" Digital Height Gage

24" Digital Height Gage

Part#: 3752-24/600
Supplier: Starrett
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge

With the Starrett 3752 Digital Height Gage, it's incredibly easy to measure the height of workpieces.  Used for vertical measurements from 0 to 24 inches the Starrett 3752 Digital Height gage can transfer all measurements data to the computer, to be entered directly into Starrett Data Collection Systems for analysis, data collection and hard copy documentation. Plus, it comes with very useful features such hold control to retain a reading at any position, ability to install minimum and maximum limits or the ability to set zero at any position. You can also enjoy the simple operations, self-contained digital electronic readout and accuracy of the height measurements.

These Starrett 3752 24" Digital Height Gage are ideally suited for anyone looking for a great instrument that offers high precision and accurate measurement at an extremely affordable price.

The Starrett 3752 24" Digital Height Gage is equipped with all necessary features for a high productivity level. At the same time versatile and economic, this 24" Digital Height Gage comes with a large and easy do read LCD display able to display the readings to .0005" or 0.01mm.

The Starrett 3752 24" Digital Height Gage guarantees an excellent repeatability. It is equipped with a large positive action keypad and featured by plus or minus indication that allows reading in proper direction and one preset button to install any reading at any position.

Starrett 3752 24" Digital Height Gage is available in 0-12" and 0-24" ranges. 0-600mm (0-24”) Range.


  • Clear bar graduations in .100" and 5mm increments
  • Large (.380"/9.65mm), easy-to-read LCD display reads to .0005" or 0.01mm
  • Instant inch-millimeter conversion
  • Carrier and scriber designed to read from zero
  • Hold control feature retains a reading at any position
  • Plus or minus indication allows reading in proper direction
  • Ability to set zero at any position
  • Manual on/off plus a built-in automatic off after 30 minutes of nonuse
  • Large positive action keypad
  • Ability to retain and return to the true zero reading of the height gage
  • PRESET button to install any reading at any position
  • Ability to install minimum and maximum limits
  • RS232 data output port
  • Works well with Starrett DatasureWireless Data Collection Systems
  • 1-1/2+ years battery life. Two 3-volt batteries furnished (CR2450).

Data Output

The height gage comes with an output port that allows data transmission to Starrett No. 772 Data Collection Systems, No. 761 Multiplexer or to other devices that support Starrett RS232 format.Cable No. PT62103 is needed to interface with the above Starrett devices.
Output is initiated via the button on the output cable or by transmitting an ASCII character to the gage.The output format is 4800 BAUD, 8 data bits, no parity, 1 stop bit, ASCII data. Transmission is exactly 16 characters, followed by a carriage return and line feed.


  • Range (in) 0-24"
  • Range (mm) 0-600mm
  • Resolution (in) .0005"
  • Resolution (mm) 0.01mm
  • Accuracy (in): (+/-)0.0015" for 0-18"; (+/-)0.002" for 18-24"
  • Accuracy (mm): (+/-)0.04mm for 0-450mm; (+/-)0.05mm for 450-600mm



Well featured and still economic solution for most height measurement applications, the Starrett 3752 Digital Height Gage will provide you a new experience in height gage measurement.

Need to have this new Starrett 3752-24/600 24" Digital Height Gage calibrated? While this gauge has passed a quality control check, having a calibration certificate for height gauges might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old Starrett gauge to be calibrated? We might be able to calibrate Starrett height gauges (Starrett 3752-24/600 or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescriptionUnitPriceIn Stock
3752-24/600Starrett 24" Digital Height Gagepiece 0
To order 24" Digital Height Gage or technical assistance please contact us.

More Recommendations for Height Gauges