Height Gauges arrow Mitutoyo Digimatic Height Gage SERIES 192

Digimatic Height Gage SERIES 192

Part#: Series 192
Supplier: Mitutoyo
Calibration Certificate: is available at extra cost
Photo Gallery - click any photo to enlarge

This Mitutoyo Height Gage uses double column design that provides highly repeatable measurements and stability.

Mitutoyo Series 192 is an easy-to-use standard type height gage with a 6 digit LCD, max response speed of 500mm/s and a resolution of 0.01mm or 0.0005"/0.01mm.

We also carry single column height gauges.

Buy this realy reliable Height Gauge manufactured by Mitutoyo from us and get ready for accurate measurements with an excellent repeatability.


  • Easy-to-use standard type
  • Highly versatile multi-function type
  • Carbide-tipped scriber is provided
  • Double-column structure ensures high measuring accuracy
  • Coarse/fine feed switching
  • Rigid construction ensures repeatable measurement.
  • Bi-directional touch-signal probe is an optional accessory.
    It can quickly and accurately measure steps, inside width, and outside width.
  • With SPC data output.


  • Zero-setting
  • ABS/INC switching
  • Presetting
  • Probe tip diameter compensation
  • -/+ switching
  • Power ON/OFF
  • Data hold
  • No Output
  • inch/mm conversion (on inch/metric models only)
  • Alarm: Low voltage, Counting value composition error




Resolution: 0.01mm or .0005"/0.01mm
Display: LCD, 6-digit
Max. response speed: 500mm/s
Battery: CR2032 lithium (1 pc.), 05SAA217
Battery life: Approx. 2000 hours under normal use

For more info please refer to the list below:

Need to have this new Mitutoyo Series 192 Digimatic Height Gage SERIES 192 calibrated? While this gauge has passed a quality control check, having a calibration certificate for height gauges might be required by your quality control system. Digital Measurement Metrology (owner of ProcessInstruments.ca) is a canadian metrology company with more than 25 years of experience. Our Brampton, Ontario based calibration lab has one of the most comprehensive ISO 17025 accredited calibration scope in Canada.

Do you have an old Mitutoyo gauge to be calibrated? We might be able to calibrate Mitutoyo height gauges (Mitutoyo Series 192 or a different model) and provide an ISO, NIST traceable calibration certificate. Please contact our metrology lab for more info.

Ordering info

SKUDescription type Accuracy Range ResolutionIn Stock
192-663-10Metric Height Gage 0.04mm 0-300mm Switchable
between0.01mm and 0.005
192-664-10Metric Height Gage 8.3 0-600mm Switchable between
0.01mm and 0.005
192-665-10Metric Height Gage 0.06mm 0-1000mm Switchable
between0.01mm and 0.005
192-670-10Inch/Metric Height Gage 0.001in 0-12in 0-300mm .0005in 0.01mm .0002in(0.005mm)
192-671-10Inch/Metric Height Gage 0.0015in 0-18in 0-450mm .0005in 0.01mm .0002in
192-672-10Inch/Metric Height Gage 0.0015in 0-24in 0-600mm .0005in 0.01mm .0002in
192-673-10Inch/Metric Height Gage 0.0025in 0-40in 0-1000mm .0005in 0.01mm .0002in
To order Digimatic Height Gage SERIES 192 or technical assistance please contact us.

More Recommendations for Height Gauges